Home » Product Directory » Lights & Lighting » Lighting Fixtures » Other Lighting Fixtures »

T8 To T5 Adapter

T8 To T5 Adapter

Trade Info
Trademark: Guangjia
Packing: in carton of 30 PCS
Standard: CE. ROHS, EMC
HS Code: 85399000
Basic Info
Model NO.:without reflector-1
Export Markets:Global
Additional Info.
Trademark:Guangjia
Packing:in carton of 30 PCS
Standard:CE. ROHS, EMC
Origin:China
HS Code:85399000
Production Capacity:100, 000PCS/month
Product Description

Lighting Reconstruction Program
T5 Linear fluorescent lamp, a new generation lighting sources, will replace T8/T10/T12 because of its excellent performance and advantages. Here we introduce an electronics T5 system which can update the old magnetic T8/T10/T12 system easily, this will meet the requirement of the Energysaving Lighting Reconstructing Program all over the world.:

The system includes one IEC standard T5 Tri-phosphor fluorescent tube and one build-in ballast fixture with G13 pin base. The system meets IEC standard T8/T10/T12 in size and base. Can install in magnetic T8/T10/T12 fixtures directly.
Why replace T8(T10, T12)lamp with this special T5 converter?
Here are the reasons:
1. Comparing with magnetic T8(T10, T12), it will save 35-50% electricity which save power bill by 35-50%.
2. No need to change anything on the original fixture.
3. Easy installation, the replacing procedures are the same as replacing a normal tube. Will much save the labor cost of Energysaving Lighting Reconstructing Program.
4. Power factor improved from 0.5(traditional magnetic ballast) to >0.98. The current decreases by 3-5 times which will help to reduce the wastage of electricity system and thus save energy.
5. Rapid start without flickering, even under low temperature or low voltage.
6. CRI>80, get better color performance.
7. Hi frequency electronic ballast, protecting eyes from 50Hz flickering of light caused by magnetic ballasts.
8. Noises free.
9. Reduce heat during operation. It indirectly saves energy because it helps to decrease the load of air-conditioning system.
10. Complete abnormal protection function prevent from burning on accident, life end or gas leak etc.
11. The fixture reflector can distribute the light to right direction, improve the system efficiency and then save more energy.

How to replace:
1. Turn off power supply
2. Take away the T8 Lamp
3. Take away the starter
4. Take away the rectify capacitor, if not, the power factor of the capacitor will be reduced to 0.5
5. Install the T5 lamp tube what in a same way of T8 Lamp
6. Turn on the power, then finish the installation.

Product Specification:
1. Power factor: 0.98
2. THD: ≤10%
3. Tc: 50 degree Ta: 0- +50 degree
4. EMC: Not passed
5. Dielectric strength: Can stand 1500V for one minute without electrical breakdown. 6. Insulating Resistance: ≥100MΩ
7. Abnormal protection: YES
8. Surface temperature rise: ≤25K
9. Leakage Current: Below 1mA
10. Wire is 0.25mm2
11. The ballast and tube can start while put in the fridge at -10 degree when input with rated voltage.
12. The ballast and tube can work well for 2 hours at 100 degree oven and no components is over heated.
13. Imitating the tube can not start, turn on and off the ballast for 100 times, there is not any damage to the ballast.
14. The average life for the ballast is 5 years, and quality guarantee is 2 years. The tube life time is 8000hours.

T5 integrative system To replace T8 tube To replace T10 ,T12 tubes
14W 18W 20W
21W 30W 30W
28W 36W 40W 
35W 58W  





Comparision on 14W T5 integrative system & 18W T8 magnetic fixtures
Electrical parameter 18W T8 fluorescent lamps 14W T5 integrative system
Input wattage 24W 14W
Power factor 0.33 0.99
Current 0.33A  0.06A
THD   12%
Flickering Yes No
Noises Yes No
Start A few seconds
 
Instant
Electricity consumption 0.024 kilowatt/hr 0. 014 kilowatt/hr
Electricity saving Comparing with 18W T8, 14W T5 will save electricity by 42%.

Comparision on 21W T5 integrative system & 30WT8 magnetic fixture
Electrical parameter 30WT8 fluorescent lamps 21W T5 integrative system
Input wattage 37W 21W
Power factor 0.53  0.99
THD   10%
Current 0.32A 0.1A
Flickering Yes No
Noises Yes No
Start A few seconds Instant
Electricity consumption 0. 037 kilowatt/hr 0. 021 kilowatt/hr
Electricity saving Comparing with 30W T8, 21W T5 will save electricity by 43%

Comparision on 28W T5 integrative system & 36WT8 magnetic fixture
Electrical parameter 36W T8   fluorescent lamps 28WT5 integrative system
Input wattage 42W 28W
Power factor 0.53  0.99
THD   10%
Current 0.32A 0.13A
Flickering Yes No
Noises Yes No
Start A few seconds Instant
Electricity consumption 0. 042 kilowatt/hr 0. 028 kilowatt/hr
Electricity saving Comparing with 36W T8, 28WT5 will save electricity by 33%

Comparision on 35W T5 integrative system & 58W T8 magnetic fixtures
Electrical parameter 58W T8 fluorescent lamps
 
35W T5 integrative system
Input wattage 67W 35W
Power factor 0.5  0.99
THD   10%
Current 0.61A 0.16A
Flickering Yes No
Noises Yes No
Start A few seconds Instant
Electricity consumption 0.067 kilowatt/hr 0. 035 kilowatt/hr 
Electricity saving Comparing with 58WT8, 35WT5 will save electricity by 48%.